A smartphone with the home+control app on a blue living room
livingnow, livinglight and matixGO gateway models
BTdin gateway model

ACTIVATING YOUR SMART HOME

 

 

Once you have downloaded and installed the Home+Control app you can start the activation procedure and configuration phase of your gateway.

Make sure to have a working Wi-Fi connection: the Gateway will use this connection to link all the smart devices installed in your home with the Gateway itself and to the Home+Control App.

Google play

IOS

 

icon-alert
Wifi tips

Keep your wifi password handy, you will need it during the activation phase. Please be aware that the 5GHz are not supported.

icon-smart-smartphone
About the Home+Control app

The Home+Control app will guide you through all the configuration steps. After the installation, you can access it to start the process.

icon-installatore
No technical operation needed

The configuration procedure does not require any technical operation on the electrical plant. You have to rely on a professional electrician only if you need to install the Gateway.

Start the configuration with Home+Control
Image
Home+Control screenshot: create an account
1. CREATE AN ACCOUNT

At the very first access Home+Control will ask you to create an account. You will need just Address, mail and password. If you have already a Legrand/Bticino/Netatmo account you can go directly to the login. This shortcut will be useful for future accesses. 

Image
Home+Control screenshot: select your gateway
2. GATEWAY SELECTION

Once indicated the brand of Gateway installed (in this case Bticino), choose your type:
 

  • Select “Gateway Module with general on/off scenario” for the flush mounted Gateway
     
  • Select “Command Module” for the BTdin Gateway installed directly on the electrical panel.
Image
Home+Control screenshot: green light on
3. MANUAL ACTIVATION

For this step you need to be physically near your gateway and follow the app instructions until you green light will appear.

In case of persisting problem just check the FAQ section or contact your local customer care.
 

Image
Home+Control screenshot: wi-fi connection
4. WIFI CONNECTION

Do you have the geolocation on ? The Home+Control app will use the localisation of your smartphone in order to find your home wifi network. Once this step is done just insert the password of your Wifi.

Image
Home+Control screenshot: product scanning
5. APP ACTIVATION

Using the Wi-Fi network Home+Control will be capable to spot your Gateway. It will ask you to confirm the device found and associate it to your home network. It’s likely that there will be some firmware to download. Once the uploads are finished, a blue light will start blinking on the Gateway: this means that it will re-start for the final step of the configuration.

Image
Home+Control screenshot: create your home and add all the devices
6. HOME SETUP

The activation is now completed! You can start creating your home: add all the rooms and associate to each room the smart devices ( like lights, sockets, shutters, Smarther Thermostat…)

F.A.Q
1. What do I need to start the activation process?

You need an active wifi network and a smartphone ( or tablet) with the Home+Control app installed.

2. What is a gateway?

Gateway is the heart of your smart home system because it will connect all the smart devices ( like sockets, switches…) of your home and control them by App or voice.

3. Why I need to activate it?

The activation phase lets the gateway recognize all the smart devices installed in your home and therefore manage them through the app.

4. How can I know which are the smart devices installed?

During the activation process the Gateway will discover the different devices and it will show them in the app.

5. Can I rename rooms and devices

Certainly, in the app is always possible to rename the devices ( eg. bedroom light) and the rooms as well.

6. Can I change router or Wifi network?

Yes you just need to enter the Home+Control app and select “Manage my home”, select Gateway and the “Configure Wifi”.

7. Can I use the smart voice assistant to control my devices?

Yes Bticino is compliant with all the smart speakers like Google, Amazon and Apple.

8. How can I link my smart home system with Alexa?

You need a working Alexa device connected to the Wifi network and the Home+Control app installed on your smartphone. Then you need to activate the Alexa Skill “Legrand, Netatmo, Bticino”, log in with your Bticino account and select “check for devices”. Once this step is ended all the smart devices of your home will be manageable with Alexa.

YOU MAY ALSO BE INTERESTED IN
Image
smart solutions
SMART SOLUTIONS FOR EVERY HOME

The Smart Home solutions offered by Bticino consist of easy-to-install and easy-to-use connected devices integrated with the standard ranges.

Image
Netatmo smart security offer
SMART SECURITY

If you want to improve the security of your home you can add some devices specifically aimed at this and manage them with the Home+Security app.

Image
VIDEO DOOR ENTRY SYSTEM
VIDEO DOOR ENTRY SYSTEM

Discover the complete range of entrance panels, audio and video internal units and kit solutions for villas, condominiums and renovations.